Welcome to Haomei Aluminum ! About | Contact | Leave Message
Email: nydia@aluminumhm.com
Position:Home > News >

3005 Coated Aluminum Strip For Roller Shutters

Author: Nydia View: Time: 2026-11-19 17:52

3005 coated aluminum strips are the preferred substrate for roller shutters and windows, offering an ideal balance of strength, corrosion resistance, and formability. Designed specifically for continuous roll-forming and the demands of long-term outdoor use, we have fine-tuned every stage of the process—from base-metal rolling and coating formulation to precision slitting—is meticulously optimized to ensure consistent, high-quality raw materials for roller-shutter manufacturers.

3005 coated aluminum strip for roller shutter

3005 aluminum-manganese-magnesium alloy is available in H14, H24, and H26 tempers to meet various wind-resistance requirements. The H24 temper is the industry standard, offering a tensile strength of 115–155 MPa, a yield strength of ≥90 MPa, and an elongation of ≥4%, providing an optimal balance between rigidity and formability. The H26 temper offers higher strength, making it suitable for large-scale industrial roller shutters and installations in high-wind regions. The 3005 aluminum strips are available in thicknesses from 0.22mm to 0.6mm, with slitting widths customizable to specific slat dimensions (typically 100–150mm). We maintain strict tolerances—±0.2mm for width and ±0.02mm for thickness—and offer core inner diameters of 150mm, 405mm, and 508mm. The alloy composition is strictly controlled, with manganese (Mn) at 1.0–1.5% and magnesium (Mg) at 0.2–0.6%, while copper (Cu) content is limited to ≤0.3% to minimize the risk of electrochemical corrosion at the material level. In terms of production, aluminum strips for roller shutters require exceptionally high edge quality; therefore, we utilize carbide circular slitting knives to keep edge burrs within 0.03 mm, preventing coating scratches or equipment jams during the forming process.

The coating system is optimized for both wear resistance and weatherability, specifically for outdoor roller shutter applications. We offer three standard coating options: a conventional polyester coating (dry film thickness ≥18 μm) for indoor shutters or mild inland environments; a High-Durability Polyester (HDP) coating (dry film thickness ≥20 μm) paired with a 5–7 μm anti-corrosive primer—capable of withstanding 1,000 hours of neutral salt spray testing without blistering or peeling, and maintaining color for up to 15 years outdoors (a popular choice for exports to the Middle East and Southeast Asia); and a PVDF fluorocarbon coating (dry film thickness ≥25 μm) designed for coastal or high-UV-radiation regions, which shows a color difference (ΔE) of ≤2.0 after 2,000 hours of accelerated xenon-arc aging, ensuring long-term resistance to chalking and fading. All aluminum strips products undergo a chromium-free passivation pretreatment, creating a dense 50–80 nm conversion layer; this results in a cross-cut adhesion rating of 0 and ensures no cracking under a 50 kg·cm reverse impact. Based on years of export feedback, we have incorporated wear-resistant additives into our coating formulations—achieving a pencil hardness of ≥HB—to reduce coating wear caused by the daily opening and closing of the shutters.

Regarding formability, the 3005 alloy undergoes an in-line stress-homogenization process, keeping residual coil stress below 50 MPa. This ensures that after roll forming, the slats exhibit a spring-back rate of ≤1.2%, resulting in uniform gaps between assembled slats and eliminating the need for additional leveling steps. We offer customization across the entire RAL color spectrum, with a color difference (ΔE) of ≤0.8 between batches and ≤0.5 within the same coil—ensuring the visual consistency required for large-scale projects. Haomei’s coated aluminum strip for roller shutter products are fully compatible with roll-forming equipment used for European-style roller shutters, garage doors, and external shading systems, requiring no adjustments to core process parameters.

Haomei Aluminum operates an integrated production line covering rolling, coating, and slitting, with a monthly capacity of 1,200 tons. Standard specifications can be delivered within 15 days, and we accommodate both small-batch trial orders and customized requirements. Every shipment includes comprehensive material certification and coating performance test reports; third-party re-inspection is also supported. We currently supply roller shutter manufacturers in over 80 countries worldwide, providing tailored material recommendations based on local climatic conditions and specific equipment requirements. Please feel free to contact us for sample testing or technical consultation.

Keywords:3005 coated aluminum strip for roller shutter

Aluminum Sheet Aluminum Plate Aluminum Circle Disc Aluminum Foil Aluminum Bus Bar Aluminum Slugs