Aluminum Strip Application Instruction

Aluminium strip is used for many purposes, such as: aluminum-plastic composite pipes, cables, optical cables, transformers, heaters, shutters and more. Commonly used aluminum strip grades are 1050,1060,1070,1100,3003,3004,5005,5052,8011 like. Common states are O and H state and other states. O represents the soft state, H represents a hard state. O and H can be followed by numbers indicate the degree of soft and hard, and the degree of annealing. The below is two simple example for aluminum strips. 3003 board strip. Foil. Plate, drawing tube. Squeeze tubes. type. Baton. Wire. Cold bar, cold wire, rivets, wire, forgings, foil, heat sink material is mainly used for processing the need for good formability, high corrosion resistance, good weldability, or parts, or both of these performance requirements of there is a need more than 1 *** alloy high strength of the workpiece, such as transport liquid tank and tanks, pressure tanks, storage devices, heat exchangers, chemical equipment, aircraft fuel tanks, oil tube, reflectors, kitchen equipment, washing machine cylinder body, rivets, welding wire. 3004 aluminum sheet, plate, drawing tube. Just squeeze tube for aluminum cans cans, requiring higher than the 3003 alloy parts, chemical products and storage equipment, sheet metal parts, building baffles, cable ducts, sewers, all kinds of lighting components.

The following steps to cleaning aluminium strip:
1, The first surface of the plate was washed with water;
2, Has been moistened wipe the plate surface water diluted detergent with a soft cloth lightly;
3, And then a lot of water rinse the plate surface, the dirt washed away;
4, Check the board for no clean place to focus on cleaning detergent;
5. Rinse the board until all the detergent flush. So we must know it, While the aluminum surface will be dirt or oxidation occurs after prolonged use, we are required to do regular cleaning aluminum.